ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(วิศว) เหล็กกล้าชนิดเหนียว มรส่วนประกอบ chro.niun 0.87 เปอร์เซ็นต์ Vunadium 0.18 เปอร์เซ็นต์
(english) The cold working of dead soft annealed strip metal immediately prior to a forming, bending, or drawing operation. A process designed to prevent the formulation of Luder's lines. Caution-Bridled metal should be used promptly and not permitted to (of itself) return to its pre-bridled condition.
(Environmental Engineering) A tank in which quiescent settling occurs, allowing solid particles suspended in the water to agglomerate and settle to the bottom of the tank. The solids resulting from the settling being removed as a sludge.
Removal of part of coil from entry end of unit; may be necessitated by a defect in coil or by a wreck in the mill, etc. Backoff weight is the part of the coil that is removed and not finished/produced.
(english) High-carbon steel produced by carburizing wrought iron. The bar, originally smooth, is covered with small blisters when removed from the cementation (carburizing) furnace.
เครื่องตกแต่งยุคเรเนซองส์ เป็นรูปหัวคนในแผ่นวงกลมหรือลายขดม้วนหรือรูปเรขาคณิต
ชุบโครเมี่ยม
เป็นครั้งคราว
(english) A storage area in Strip Steel used for storing hot bands (coil made from slab).
สนามบิน
(ไม้) เป็นไม้ตระกูล Ocliroma lagopus เป็นต้นไม้ที่ขึ้นอยู่ทางหมู่เกาะอินเดียตะวันตก แถบอเมริกันตอนกลาง เป็นไม้ที่มีน้ำหนักเบา ใช้มากในการสร้างโครงประกอบเครื่องบิน
(Concrete Engineering) 1) Reaction between the products of portland cement (soluble calcium hydroxides), water and carbon dioxide to produce insoluble calcium carbonate (efflorescence). 2) Soft white, chalky surface dusting of freshly placed, unhardened concrete caused by carbon dioxide from unvented heaters or gasoline powered equipment in an enclosed space. 3) Carbonated, dense, impermeable to absorption, top layer of the surface of concrete caused by surface reaction to carbon dioxide. This carbonated layer becomes denser and deeper over a period of time. 4) Reaction with carbon dioxide which produces a slight shrinkage in concrete. Improves chemical stability. Concrete masonry units during manufacturing may be deliberately exposed to carbon dioxide after reaching 80% strength to induce carbonation shrinkage to make the units more dimensionally stable. Future drying shrinkage is reduced by as much as 30%.