ตัวกรองผลการค้นหา
Boss
แปลว่า(english) A projection or an enlarged section of a casting through which a hole may be machine.
Bath
แปลว่า(english) Molten metal on the hearth of a furnace, in a crucible, or in a ladle
Back Gears
แปลว่า(english) Gears fitted to a machine to increase the number of spindle speeds obtainable with a cone or step pulley belt drive.
Bright Dip
แปลว่า(english) An acid solution into which pieces are dipped in order to obtain a clean, bright surface.
BACK PRESSURE
แปลว่า(english) The level of pressure on the return or downstream side of a device or system.
Baked Strength
แปลว่า(english) Compressive, shear, tensile or transverse strength of a mold sand mixture when baked at a temperature above 231 B0F (111 B0C) and then cooled to room temperature.
System of Forces:
แปลว่า(english) One or more forces and/or moments acting simultaneously.
Balling Drum
แปลว่า(english) A rotating drum that is used for adding moisture to the sinter mix in the Blast Furnace. Also, it enhances a balling action where the smaller sized materials adhere to larger materials.
Baked Core
แปลว่า(english) A core which has been heated through sufficient time and temperature to produce the desired physical properties attainable from its oxidizing or thermal-setting binders.
Bar, Flask
แปลว่า(english) A rib in the cope of a tight flask to help support the sand.
Band Dispenser
แปลว่า(english) Device that holds that roll of steel banding.
Blackening Scab
แปลว่า(english) A form of casting defect related to an improper coating rather than to the sand.