ผลการค้นหา

Bright Annealing

แปลว่า(english) A process carried out usually in a controlled furnace atmosphere, so surface does not oxidize, remaining bright.

Organic compound

แปลว่า(Environmental Engineering) Any compound containing carbon except for the carbonates (carbon dioxide, the carbonates and bicarbonates), the cyanides, and cyanates.

Software Requirements Specification

แปลว่า(Software Engineering) a deliverable that describes all data, functional and behavioral requirements, all constraints, and all validation requirements for software

Time-boxing

แปลว่า(Software Engineering) a project scheduling and control technique that establishes time boundaries for the completion of a specific project task

Billet container

แปลว่า(english) The part of the extrusion press into which the billet to be extruded is placed.

Calcine

แปลว่า(Concrete Engineering) To alter composition or physical state by heating to a specific temperature for a specific length of time.

Burr

แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Licence for Professional Practice (วสท.) - or Controlled Engineer License , Registed Engineer License

แปลว่าใบอนุญาตเป็นผู้ประกอบวิชาชีพวิศวกรรมควบคุม

Chemical fixation (or stabilization/solidification)

แปลว่า(Environmental Engineering) A term for several different methods of chemically immobilizing hazardous materials into a cement, plastic, or other matrix.

Acme Thread

แปลว่า(english) A screw thread having a 29 degree included angel. Used largely for feed and adjusting screws on machine tools.

Non-agitating Unit

แปลว่า(Concrete Engineering) A truck-mounted unit for transporting ready-mixed concrete short distances, not equipped to provide agitation (slow mixing) during delivery.

Boss

แปลว่า(english) A projection or an enlarged section of a casting through which a hole may be machine.