ผลการค้นหา

Burning

แปลว่า(english) (1) Permanently damaging a metal or alloy by heating to cause either incipient melting or intergranular oxidation. (2) In grinding getting the work hot enough to cause discoloration or to change the microstructure by tempering or hardening.

Inertia:

แปลว่า(english) The tendency of an object at rest to remain at rest, and of an object in motion to remain in motion.

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

Bridling

แปลว่า(english) The cold working of dead soft annealed strip metal immediately prior to a forming, bending, or drawing operation. A process designed to prevent the formulation of Luder's lines. Caution-Bridled metal should be used promptly and not permitted to (of itself) return to its pre-bridled condition.

Software metrics

แปลว่า(Software Engineering) quantitative measures of the process or the product

ADAPTER

แปลว่า(english) A mechanical device used to align the shaft of an electric motor (or other rotary device) with the shaft of a hydraulic pump to maintain radial and parallel shaft alignment.

Kelly Ball

แปลว่า(Concrete Engineering) A device for determining the consistency of fresh concrete. It is sometimes used as an alternative to the slump test.

Nitrogenous oxygen demand (NOD)

แปลว่า(Environmental Engineering) The amount of oxygen required to oxidize any ammonia present in a water.

Bridle Unit

แปลว่า(english) A three-roll cluster used to control line tension at strategic locations on the line.

Brittleness

แปลว่า(english) The tendency of a metal or material to fracture without undergoing appreciable plastic deformation.

Requirements analysis

แปลว่า(Software Engineering) a modeling activity whose objective is to understand what the customer really wants

Adapters

แปลว่า(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.