ผลการค้นหา

steel for* *steel for *steel for*
คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 323 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "steel for"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Brake Press Bending

(english) An operation which produces various degree bends when fabricating parts from steel.

Chemoautotrophic

(Environmental Engineering) Organisms which utilize inorganic carbon (carbon dioxide or carbonates) for synthesis and inorganic chemicals for energy. See autotrophic and photoautotrophic.

Test case design

(Software Engineering) a set of techniques for deriving effective test cases

Project Plan

(Software Engineering) a description of the management approach for a project

Bloom 2

(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.

Consistency

(Concrete Engineering) The degree of plasticity of fresh concrete or mortar The normal measure of consistency is slump for concrete and flow for mortar.

Bright Drawing

(english) The process of drawing hot rolled steel through a die to impart close dimensional tolerances, a bright scale free surface and improved mechanical properties. The product is termed bright steel.

Accm

(english) In hypereutectoid steel, the temperature at which cementite goes into complete solution with austenite.

Bloomery

(english) A primitive furnace used for direct reduction of ore to iron.

Abrasive Wheels

(english) Wheels of a hard abrasive, such as Carborundum used for grinding.

Blasting (Blast Cleaning)

(english) A process for cleaning or finishing metal objects by use of an air blast or centrifugal wheel that throws abrasive particles against the surface of the work pieces. Small, irregular particles of steel or iron are used as the abrasive in grit blasting, and steel or iron balls in shot blasting.

Billet 2

(english) A solid semi-finished round or square product that has been hot worked by forging, rolling, or extrusion. An iron or steel billet has a minimum width or thickness of 1 1/2 in. and the cross-sectional area varies from 2 1/4 to 36 sq. in. For nonferrous metals, it may also be a casting suitable for finished or semi-finished rolling or for extrusion.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด