ตัวกรองผลการค้นหา
Total solids
แปลว่า(Environmental Engineering) (TS) is the amount of organic and inorganic matter which is contained in a water.
Truck Mixer
แปลว่า(Concrete Engineering) A concrete mixer capable of mixing concrete in transit when mounted on a truck chassis.
Scalar:
แปลว่า(english) A mathematical entity which has a numeric value but no direction (in contrast to a vector).
Bright Dip
แปลว่า(english) An acid solution into which pieces are dipped in order to obtain a clean, bright surface.
Ac3
แปลว่า(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.
Strain:
แปลว่า(english) The intensity of deformation at a point in an object. See normal strain and shear strain.
Fixed support:
แปลว่า(english) In two dimensions, a fixed support restrains three degrees of freedom: two translations and one rotation.
Groundwater
แปลว่า(Environmental Engineering) Water which is contained in geologic strata. Also properly written as two words, ground water.
Shear modulus:
แปลว่า(english) The ratio of shear stress divided by the corresponding shear strain in a linear elastic material.
Backward Extrusion
แปลว่า(english) Forcing metal to flow in a direction opposite to the motion of a punch or die.
Non-evaporable Water
แปลว่า(Concrete Engineering) The water in concrete which is irremovable by oven drying; chemically combined during cement hydration.
Brazing
แปลว่า(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.