ผลการค้นหา

give in to* *give in to *give in to*
คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 563 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "give in to"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Elastic:

(english) A material or structure is said to behave elastically if it returns to its original geometry upon unloading.

Aging 2

(english) A change in properties that occurs at ambient or moderately elevated temperatures after hot working or a heat treating operation (quench aging in ferrous alloys), or after a cold working operation (strain aging). The change in properties is often, but not always, due to a phase change (precipitation), but does not involve a change in chemical composition. In a metal or alloy, a change in properties that generally occurs slowly at room temperature and more rapidly at higher temperatures.

Base Metal

(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

Acid Embrittlement

(English) Embrittlement during pickling due to absorption of hydrogen.

Belly Roll

(english) Roll used on the line to steady plate.

Outsourcing

(Software Engineering) contracting software work to a third party

Classic life cycle

(Software Engineering) a linear, sequential approach to process modeling

Ultimate disposal

(Environmental Engineering) The process of returning residuals back to the environment in a form which will have the minimal or reduced negative environmental impacts.

Box Annealing 2

(english) A process of annealing a ferrous alloy in a closed metal container, with or without packing materials, in order to minimize the effects of oxidation. The charge is normally heated slowly to a temperature below the transformation range, but occasionally above or within it, and then is slowly cooled.

Calcine

(Concrete Engineering) To alter composition or physical state by heating to a specific temperature for a specific length of time.

AIR BLEEDER AUTOMATIC

(english) A valve that is fit into a hydraulic pipeline to facilitate automatic release of air trapped in the pipeline. See also AIR BLEEDER, MANUAL.

Bonderizing

(english) The coating of steel with a film composed largely of zinc phosphate in order to develop a better bonding surface for paint or lacquer.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด