ผลการค้นหา

Displacement:

แปลว่า(english) A change in position. A displacement may be a translation a rotation or a combination of those.

Absolute Volume

แปลว่า(Concrete Engineering) The volume of an ingredient in its solid state, without voids between individual pieces or particles, in the case of fluids, the cubic content occupied. In concrete, the actual volume occupied by the different ingredients determined by dividing the weight of each ingredient pounds, by ifs specific gravity, times the weight of one cubic foot of water in pounds. Example: Absolute Volume of one sack of cement equals: 94 ๗ (3.15X62.4) = 0.478 cubic feet

Bake

แปลว่า(english) Heat in an oven to a low controlled temperature to remove gases or to harden a binder.

Stakeholders

แปลว่า(Software Engineering) any person of group that has a stake in the successful completion of a software project

Bright Annealing

แปลว่า(english) A process carried out usually in a controlled furnace atmosphere, so surface does not oxidize, remaining bright.

Peeling

แปลว่า(Concrete Engineering) A process in which thin flakes of matrix or mortar are broken away from concrete surface; caused by adherence of surface mortar-to forms as forms are removed, or to trowel or float in portland cement plaster.

Deoxygenation

แปลว่า(Environmental Engineering) The consumption of oxygen by the different aquatic organisms as they oxidized materials in the aquatic environment.

Dump

แปลว่า(Environmental Engineering) An illegal and uncontrolled area where wastes have been placed on or in the ground. See Landfill.

Banding

แปลว่า(english) Inhomogeneous distribution of alloying elements or phases aligned in filaments or plates parallel to the direction of working.

Chemical oxygen demand (COD)

แปลว่า(Environmental Engineering) The amount of oxygen required to oxidize any organic matter in the water using harsh chemical conditions.

BLADDER

แปลว่า(english) A separator or diaphragm usually found in a chamber to facilitate separation of two (2) fluids or gases.

Pining

แปลว่า(Concrete Engineering) Development of relatively small cavities in a concrete surface, due to phenomena such as cavitation or corrosion.