ตัวกรองผลการค้นหา
Milestones
แปลว่า(Software Engineering) a point in time that is used to indicate progress during a project
Bearing Strength
แปลว่า(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.
Inertial Force:
แปลว่า(english) A fictitious force used for convenience in visualizing the effects of forces on bodies in motion. For an accelerating body, the inertial force is considered as a body force whose resultant acts at the object's center of gravity in a direction opposite the acceleration. The magnitude of the force is the mass of the object times the magnitude of the acceleration.
Condensation
แปลว่า(Concrete Engineering) When a moisture laden gas comes in contact with a cooler surface a change of state from gaseous to liquid occurs.
ACTUATOR
แปลว่า(english) A device for converting hydraulic energy into mechanical energy, i.e., a motor or cylinder.
Slip Form
แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.
Bar, Flask
แปลว่า(english) A rib in the cope of a tight flask to help support the sand.
Conversion
แปลว่า(Environmental Engineering) The fraction of a species entering a system which is converted to product.
Project tracking
แปลว่า(Software Engineering) the activity that enables a manager to understand the status of a project
Carbonyl
แปลว่า(Environmental Engineering) A functional group with an oxygen atom double bonded to a carbon atom.
Aldehyde
แปลว่า(Environmental Engineering) An organic compound with a carbonyl at one end of a hydrocarbon group.
Aging 1
แปลว่า(english) A change in the properties of certain metal and alloys (such as steel) that occurs at ambient or moderately elevated temperatures after a hot working heat treatment or cold working operation. Typical properties impacted are hardness, yield strength, tensile strength, ductility, impact value, formability, magnetic properties, etc. See also Non-aging.