ผลการค้นหา

ค้นเจอ 409 รายการ

Capillarity

(Concrete Engineering) A wick-like action whereby a liquid will migrate vertically through material, in a upward direction; as oil in a lamp travels upward through the wick,

Blind Bole

(english) A hole made in a workpiece that does not pass through it.

Roller support:

(english) In two dimensions, a roller support restrains one translation degree of freedom.

Reusability

(Software Engineering) the ability to reuse an already-existing program component in another application

Anaerobic process

(Environmental Engineering) A process which only occurs in the absence of molecular oxygen.

Maximum contaminant level (MCL)

(Environmental Engineering) The maximum allowable concentration of a given constituent in potable water.

Total suspended solids

(Environmental Engineering) (TSS) is the amount of suspended (filterable) matter in a water.

Stress:

(english) The intensity of internal force acting at a point in an object. Stress is measured in units of force per area. See shear stress and normal stress.

Shear strain:

(english) Strain measuring the intensity of racking in the material. Shear strain is measured as the change in angle of the corners of a small square of material.

Bend Test

(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Mixing Speed

(Concrete Engineering) Rate of mixer drum rotation or that of the paddles in a pan, open-top, or trough type mixer, when mixing a batch; expressed in revolutions per minute (rpm) or in peripheral] feet per minute of A point on the circumference at maximum diameter.

Base Type

(english) Tin Mill term; Thickness divided by .00011. Also weight in pounds of one Base Box of Tin plate. In finished inventory base weight is specified instead of decimal thickness.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด