ผลการค้นหา

ค้นเจอ 260 รายการ

Software Requirements Specification

(Software Engineering) a deliverable that describes all data, functional and behavioral requirements, all constraints, and all validation requirements for software

Calcine

(Concrete Engineering) To alter composition or physical state by heating to a specific temperature for a specific length of time.

Non-agitating Unit

(Concrete Engineering) A truck-mounted unit for transporting ready-mixed concrete short distances, not equipped to provide agitation (slow mixing) during delivery.

Abrasive Wear

(english) The displacement and / or detachment of metallic particles from a surface as a consequence of being exposed to flowing fluids or gases.

Billet 2

(english) A solid semi-finished round or square product that has been hot worked by forging, rolling, or extrusion. An iron or steel billet has a minimum width or thickness of 1 1/2 in. and the cross-sectional area varies from 2 1/4 to 36 sq. in. For nonferrous metals, it may also be a casting suitable for finished or semi-finished rolling or for extrusion.

Zinc

(english) Chemical Symbol Zn. Element No. 30 of the periodic system; atomic weight 65.38. Blue-white metal; when pure, malleable and ductile even at ordinary temperatures; melting point 787 (degrees) F.; boiling point 1665 (degrees) F., specific gravity 7.14. Can be electrodeposited; it is extensively used as a coating for steel and sheet zinc finds many outlets, such as dry batteries, etc. Zinc-base alloys are of great importance in die casting. Its most important alloy is brass.

Beam and Sling

(english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly.

Structured programming

(Software Engineering) a design method that limited design constructs to only three basic forms and constrains program flow for better quality

Buckles

(english) Appeaars like a series of waves and are created during rolling as a result of mechanical misalignment or cross-section irregularities in supply coil.

Band Saw Steel (Wood)

(english) A hardened tempered bright polished high carbon cold rolled spring steel strip produced especially for use in the manufacture of band saws for sawing wood, non ferrous metals, and plastics. Usually carries some nickel and with a Rockwell value of approximately C40/45.

Bismuth

(english) Chemical symbol Bi. A soft, course cystalline heavy metal with a silvery white color and pinkish tinge; usually produced as a by-product of copper,leaad and other metals. Has a thermal conductivity lower than all other metals except mercury. Used as alloying agent but leading use is in pharmaceuticals.

Slip Form

(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด