ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) A family of welding procedures where metals are joined by filler metal that has a melting temperature below the solidus of the parent metal, but above 840 (450 C).
ดินกรดหรือดินเปรี้ยว : ดินซึ่งมีปฏิกิริยาเป็นกรดหรือดินที่มี pH ของดินที่ผสมน้ำอิ่มตัวได้ต่ำกว่า 7.0 ดินที่แสดงค่า pH 6-7 เป็นกรดอ่อน pH 5-6 เป็นกรดปานกลาง และpH 4-5 เป็นกรดจัด
(Environmental Engineering) Synthetic organic compounds used for refrigerants, aerosol propellants (prohibited in the U.S.), and blowing agents in plastic foams. CFCs migrate to the upper atmosphere destroying ozone and increasing global warming. Typical atmospheric residence times are 50 to 200 years.
(english) Brittleness exhibited by some steels after being heated to some temperature within the range of 300 (degrees) to 650 (degrees) F, and more especially if the steel is worked at the elevated temperature. Killed steels are virtually free of this kind of brittleness.
เหล็กแวเนเดียม ปกติเป็นโลหะผสมประกอดด้วย วะเนเดียมระหว่าง 0.10 ถึง 0.15 เปอร์เซ็นต์ เป็นเหล็กที่ตีดัดรูปได้ง่าย ถ้าให้ความร้อนเพิ่มขึ้นทีละน้อยๆ
(Concrete Engineering) The product obtained by intimately intergrinding or an intimate and uniform blending a mixture of granulated blast furnace slag and portland-cement clinker
หน่วยวัดความต้านทานของไฟฟ้าเป็น "โอห์ม" (ให้ชื่อหน่วยวัดตามชื่อของ ohm นักไฟฟ้าชาวเยอรมัน ค.ศ. 1787-1854)
น้ำท่าเฉลี่ยรายปี : ค่าเฉลี่ยของปริมาณน้ำท่าทั้งปีของแม่น้ำสายหนึ่งหาได้จากปริมาณน้ำทั้งปีหลาย ๆ ปี รวมกันหารด้วยจำนวนปี ซึ่งควรเป็นระยะเวลาที่นานพอควร (15-30 ปี)
เครื่องสูบน้ำชนิดหนึ่งที่มีทิศทางการไหลของน้ำเข้าสู่ใบพัดในแนวขนานกับเพลา และไหลออกจากใบพัดทำมุม 45 ถึง 80 องศา กับแกนของเพลา
(เคมี) (C2H5OII) เอธอีลแอลกอฮล
(แร่) ขี้ผึ้งพารเรฟฟีนสีเหลืองแก่ สีน้ำตาลหรือสีดำ mp. 55p - 110C, sp gr, 0.85 - 0.95 ละลายได้ในน้ำมันเบ็นซิน, น้ำมันสน
(Concrete Engineering) Concrete panels, usually architectural designs, reinforced with a high zirconia (16% minimum), alkali-resistant glass fiber. Optimum glass fiber content of 5% by weight. Lower fiber content results in lower early ultimate strengths, higher fiber content can produce composite compaction and consolidation difficulties.