ผลการค้นหา

Block Off

แปลว่า(english) 1) Wooden separators which are used at both the bottom of a lift and between IPM's (bundles) of a lift. 2) The act of placing 4x4s between the lifts in the piler's box.

Pin connection:

แปลว่า(english) In two dimensions, a pin connection restrains two translation degrees of freedom but does not restrain rotation. Since the rotation degree of freedom is unrestrained at a pin connection, it transfers no moment.

Mixing Speed

แปลว่า(Concrete Engineering) Rate of mixer drum rotation or that of the paddles in a pan, open-top, or trough type mixer, when mixing a batch; expressed in revolutions per minute (rpm) or in peripheral] feet per minute of A point on the circumference at maximum diameter.

Inertia:

แปลว่า(english) The tendency of an object at rest to remain at rest, and of an object in motion to remain in motion.

Biofilm

แปลว่า(Environmental Engineering) A film of microorganisms attached to a surface, such as that on a trickling filter, rotating biological contactor, or rocks in natural streams.

Bead

แปลว่า(english) 1)Half-round cavity in a mold, or half-round projection or molding on a casting, 2) a single deposit of weld metal produced by fusion.

Blue Brittleness 2

แปลว่า(english) Reduced ductility occurring as a result of strain aging, when certain ferrous alloys are worked between 300 and 700 (degrees) F. This phenomenon may be observed at the working temperature or subsequently at lower temperatures.

Corrective maintenance

แปลว่า(Software Engineering) finding and fixing defects that have been reported by users

Bell Mouth

แปลว่า(english) The flaring or tapering of a machined hole, usually made at the entrance end because of misalignment or spring of the cutting tool.

Ball Burnishing

แปลว่า(english) A method of obtaining a high luster on small parts by rotating them in a wooden-lined barrel with water, burnishing soap, and stainless steel shot.

Acid

แปลว่า(english) 1) A solution or liquid with a pH less than 7, 2) term applied to slags, refractors, and minerals containing a high percentage of silica.

Backward Extrusion

แปลว่า(english) Forcing metal to flow in a direction opposite to the motion of a punch or die.