ผลการค้นหา

gear lever oil housing

แปลว่าที่บรรจุน้ำมันหล่อลื่นสำหรับคันเลื่อนเกียร์หรือเฟืองเกียร์

worm wheel

แปลว่าเฟืองตัวหนอน (ความหมายเดียวกับ worm gear)

first and second speed selector fork

แปลว่าเหล็กสับเฟืองเกียร์หนึ่งและเกียร์สอง และอีกอันหนึ่งสำหรับสับเฟืองเกียร์สามและเกียร์สี่)

Ion exchange

แปลว่า(Environmental Engineering) An adsorption process in which one ion is exchanged for another ion of like charge. There is an equivalence of exchanged charge.

lathe drill

แปลว่าแท่นกลึงโลหะที่ใช้สำหรับเจาะชิ้นงาน (เรียกว่า drilling lathe หรือ speed lathe ก็ได้)

Addendum

แปลว่า(english) That portion of a gear tooth that extends from the pitch circle to the outside diameter.

Addition Agent

แปลว่า(english) 1) Any material added to a charge of molten metal in bath or ladle to bring alloy to specifications, 2) reagent added to plating bath.

Box Annealing 2

แปลว่า(english) A process of annealing a ferrous alloy in a closed metal container, with or without packing materials, in order to minimize the effects of oxidation. The charge is normally heated slowly to a temperature below the transformation range, but occasionally above or within it, and then is slowly cooled.

Box Annealing

แปลว่า(english) Annealing a metal or alloy in a sealed container under conditions that minimize oxidation. In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly; this process is also called close annealing or pot annealing.

Black Plate

แปลว่า(english) A light weight or a thin uncoated steel sheet or strip so called because of its dark oxide coloring prior to pickling. It is manufactured by two different processes. (1) Form sheet bar on single stand sheet mills or sheet mills in tandem. This method is now almost obsolete. (2) On modern, high speed continuous tandem cold reduction mills from coiled hot rolled pickled wide strip into ribbon wound coils to finished gage. Sizes range from 12 to 32 in width, and in thicknesses from 55 lbs. to 275 lbs. base box weight. It is used either as is for stampings, or may be enameled or painted or tin or terne coated.

Basic Oxygen Furnace (BOF)

แปลว่า(english) "WHAT A pear-shaped furnace, lined with refractory bricks, that refines molten iron from the blast furnace and scrap into steel. Up to 30% of the charge into the BOF can be scrap, with hot metal accounting for the rest. WHY BOFs, which can refine a heat (batch) of steel in less than 45 minutes, replaced open-hearth furnaces in the 1950s; the latter required five to six hours to process the metal. The BOF's rapid operation, lower cost and ease of control give it a distinct advantage over previous methods. HOW Scrap is dumped into the furnace vessel, followed by the hot metal from the blast furnace. A lance is lowered from above, through which blows a high-pressure stream of oxygen to cause chemical reactions that separate impurities as fumes or slag. Once refined, the liquid steel and slag are poured into separate containers. "