ผลการค้นหา

omnibus-bar

แปลว่า(ไฟฟ้า) คำที่ใช้กันมาก่อนหน้อคำว่า bus - bar = สะพานไฟฟ้า, แผ่นโลหะที่เป็นสื่อกระแสไฟผ่านในแผงไฟ

Component reuse

แปลว่า(Software Engineering) the ability to reuse a portion of a model, source code, test case, etc.

White box testing

แปลว่าa test case design technique that makes use of a knowledge of the internal program logic

Basis path testing

แปลว่า(Software Engineering) a white box test case design technique that used the algorithmic flow of the program to design tests

Primary treatment

แปลว่า(Environmental Engineering) Treatment which includes all operation prior to and including primary treatment, e.g., bar screening, grit removal, comminution, and primary sedimentation.

Kelly Ball

แปลว่า(Concrete Engineering) A device for determining the consistency of fresh concrete. It is sometimes used as an alternative to the slump test.

Boring Tool

แปลว่า(english) A cutting tool in which the tool bit,the boring bar and in some cases the tool holder are incorporated.

Bit, Tool (cutter)

แปลว่า(english) A hardened steel bar or plate that is shaped accordidng to the operation to be performed and the material to be machined.

Blister Steel

แปลว่า(english) High-carbon steel produced by carburizing wrought iron. The bar, originally smooth, is covered with small blisters when removed from the cementation (carburizing) furnace.

Moist Room

แปลว่า(Concrete Engineering) A room used for storing and curing cementitious test specimens. The atmosphere of this room is maintained at a temperature of 73.4 3.0'F or 23.0*1.7'0 and relative humidity of at least 98 percent. These facilities must be adequate to continually maintain free moisture on the exteriors of test specimens.

Brake

แปลว่า(english) A piece of equipment used for bending sheet; also called a bar folder. If operated manually, it is called a hand brake; if power driven, it is called a press brake.

Slump Cone

แปลว่า(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.