ตัวกรองผลการค้นหา
Shear:
แปลว่า(english) An system of internal forces whose resultant is a force acting perpendicular to the longitudinal axis of a structural member or assembly: sometimes called shear force.
Slip Form
แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.
forepoling or spilling
แปลว่าการใช้เข็มเย็บดินแนวราบเหนือหน้าอุโมงค์
Displacement:
แปลว่า(english) A change in position. A displacement may be a translation a rotation or a combination of those.
Modulus of elasticity:
แปลว่า(english) The proportional constant between stress and strain for material with linear elastic behavior: calculated as stress divided by strain. Modulus of elasticity can be interpreted as the slope of the stress-strain graph. It is usually denoted as E, sometimes known as Young's Modulus Y, or E-Modulus.
Blister
แปลว่า(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.
Consistency
แปลว่า(Concrete Engineering) The degree of plasticity of fresh concrete or mortar The normal measure of consistency is slump for concrete and flow for mortar.
By-Pass
แปลว่า(english) Manual control used to by-pass automatic valve if it fails or in an emergency.
Task set
แปลว่า(Software Engineering) a collection fo software engineering tasks that are required to complete an activity or action that is part of a software process framework
BALL VALVE
แปลว่า(english) A valve that may be used to divert the flow of fluid in a passage. Most normally configured in a two-way pattern that is either open or closed.
Breakage
แปลว่า(english) Cracks or separation of the steel.
Sacking
แปลว่า(Concrete Engineering) Removing or alleviating defects on a concrete surface by applying a mixture of sand and cement to the moistened surface and rubbing with a coarse material such as burlap.