ผลการค้นหา

Bottom Up

แปลว่า(english) Reversing the wrap of a coil putting the top surface on the bottom.

Bloom 2

แปลว่า(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.

Capillarity

แปลว่า(Concrete Engineering) A wick-like action whereby a liquid will migrate vertically through material, in a upward direction; as oil in a lamp travels upward through the wick,

Defect amplification

แปลว่า(Software Engineering) when a defect is introduced early in the software process and remains undetected, it often is amplified into multiple defects later in the software process

Roller support:

แปลว่า(english) In two dimensions, a roller support restrains one translation degree of freedom.

Total suspended solids

แปลว่า(Environmental Engineering) (TSS) is the amount of suspended (filterable) matter in a water.

Maximum contaminant level (MCL)

แปลว่า(Environmental Engineering) The maximum allowable concentration of a given constituent in potable water.

Reusability

แปลว่า(Software Engineering) the ability to reuse an already-existing program component in another application

Anaerobic process

แปลว่า(Environmental Engineering) A process which only occurs in the absence of molecular oxygen.

Shear strain:

แปลว่า(english) Strain measuring the intensity of racking in the material. Shear strain is measured as the change in angle of the corners of a small square of material.

Stress:

แปลว่า(english) The intensity of internal force acting at a point in an object. Stress is measured in units of force per area. See shear stress and normal stress.

Base Type

แปลว่า(english) Tin Mill term; Thickness divided by .00011. Also weight in pounds of one Base Box of Tin plate. In finished inventory base weight is specified instead of decimal thickness.