ผลการค้นหา

lean-to* *lean-to *lean-to*
คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 378 รายการ

Baller Stick

แปลว่า(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

Debugging

แปลว่า(Software Engineering) the activity associated with finding and correcting an error or defect - a lack of conformance to requirements found in the software after delivery to the customer

Defect removal efficiency (DRE)

แปลว่า(Software Engineering) a nondimension ratio (between 0 and 1) that provides an indication of the degree to which errors are removed from software before it is released to end-users

Sulfate Resistance

แปลว่า(Concrete Engineering) Ability of cement paste, aggregate, or mixtures thereof to withstand sulfate attack.

Errors

แปลว่า(Software Engineering) a lack of conformance found before software is delivered to the customer

Elementary reaction

แปลว่า(Environmental Engineering) A reaction in which the rate expression corresponds to the stoichiometric equation.

Flexural Strength

แปลว่า(Concrete Engineering) A property of a solid that indicates its ability to withstand bending.

Vicat Apparatus

แปลว่า(Concrete Engineering) A penetration device used to determine the setting characteristics of hydraulic cements.

Bleeding, Bleed Water

แปลว่า(Concrete Engineering) A form of segregation in which some of the water in a mix tends to rise to the surface of freshly placed concrete. Known also as water gain.

Site remediation

แปลว่า(Environmental Engineering) The process of cleaning up a hazardous waste disposal site that has either been abandoned or that those responsible either refuse to cleanup or are financially unable to cleanup.

A Coatings

แปลว่า(English) Coatings on hot-dipped galvanized steels processed to convert the coating completely to zinc-iron alloys; dull gray in appearance, have no spangle, and after proper preparation, are well suited for painting.

Burn

แปลว่า(english) 1) Process of cutting metal by a stream of fuel and oxygen, 2) to permanently damage a metal or alloy by heating to cause either incipient melting or intergranular oxidation.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด