ผลการค้นหา

ค้นเจอ 141 รายการ

basic lead chromate

(เคมี) PbCrO4. Pb (OH) 2 วัตถุสีที่ได้จากการต้ม lead chromate ammonia กับน้ำยา potassium หรือ hydroxide

estimate

ประมาณการ

Z-Mill

(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.

raw material

วัตถุดิบ

Beryllium Copper

(english) An alloy of copper and 2-3% beryllium with optionally fractional percentages of nickel or cobalt. Alloys of this series show remarkable age-hardening properties and an ultimate hardness of about 400 Brinell (Rockwell C43). Because of such hardness and good electrical conductivity, beryllium-copper is used in electrical switches, springs, etc.

Magnetite

(Concrete Engineering) An aggregate used in heavy weight concrete, consisting primarily of ferrous metaferrite (Fe304). A black magnetic iron ore with a specific gravity of approximately 5.2 and a Mohs hardness of about 6.

Resources

(Software Engineering) anything that is required to get the project done, people, hardware, materials, information, etc.

Area Estimates

การประมาณราคาค่าก่อสร้างโดยการคิดจากราคาค่าก่อสร้างต่อพื้นที่

Basic Oxygen Process

(english) (BOP) A process in which molten steel is produced in a furnace by blowing oxygen into molten iron, scrap and flux materials. The furnace is known as Basic Oxygen Furnace (BOF).

Brinell Hardness Test

(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.

ultimate strength

กำลังประลัย

sublimate

คราบหรือเขม่าที่จับข้างภาชนะ, เผาให้เป็นควัน, กลั่นกรอง, ทดลอง

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด