ตัวกรองผลการค้นหา
Bi-Coil
แปลว่า(english) Also BY-COIL. Tin Mill term. Customers buy "by coil" or "bi-coil" rather than cut sheets
Bedding
แปลว่า(english) Sinking a pattern down into the sand to the desired position and ramming the sand around it.
Blind Bole
แปลว่า(english) A hole made in a workpiece that does not pass through it.
Acid Embrittlement
แปลว่า(English) Embrittlement during pickling due to absorption of hydrogen.
Bifluoride Feeder
แปลว่า(english) A machine in the Tin Mill that automatically puts bifluoride into the plater bath.
BALL VALVE
แปลว่า(english) A valve that may be used to divert the flow of fluid in a passage. Most normally configured in a two-way pattern that is either open or closed.
Adapters
แปลว่า(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.
Z-Mill
แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.
Bottle Top Mold
แปลว่า(english) Ingot mold, with the top constricted; used in the manufacture of capped steel, the metal in the constriction being covered with a cap fitting into the bottle-neck, which stops rimming action by trapping escaping gases.
Bridle
แปลว่า(english) A set of rolls used to maintain tension on the strip as it goes through the line.
Beryllium Copper
แปลว่า(english) An alloy of copper and 2-3% beryllium with optionally fractional percentages of nickel or cobalt. Alloys of this series show remarkable age-hardening properties and an ultimate hardness of about 400 Brinell (Rockwell C43). Because of such hardness and good electrical conductivity, beryllium-copper is used in electrical switches, springs, etc.
Backing Board (Backing Plate)
แปลว่า(english) A second bottom board on which molds are opened.