ผลการค้นหา

ค้นเจอ 31 รายการ

หรือคุณกำลังค้นหา shears, shear, Baked Strength

Shear:

(english) An system of internal forces whose resultant is a force acting perpendicular to the longitudinal axis of a structural member or assembly: sometimes called shear force.

Shear strain:

(english) Strain measuring the intensity of racking in the material. Shear strain is measured as the change in angle of the corners of a small square of material.

Shear modulus:

(english) The ratio of shear stress divided by the corresponding shear strain in a linear elastic material.

shearing force

แรงเฉือน, แรงตัด

shear wall, core wall

ผนังรับแรงเฉือน (จากแรงลมในอาคารสูง)

peripheral shear

แรงเฉือนตามเส้นขอบ

Bend Test

(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Burr 2

(english) Roughness left by a cutting operation such as slitting, shearing, blanking , etc.

shear force

แรงเฉือน

shear

ตัด, เล็ม, กรรไกรชนิดใหญ่สำหรับตัดต้นไม้

hole cutting shears

กรรไกรสำหรับตัดช่องหรือรูกลมแผ่นโลหะ

Burr

(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด